Agsar Ranger I-O Emulsion is an economical, water thinnable emulsion paint, especially designed for application on both the interior and exterior walls. Its self priming ability is an added advantage. Higher covering capacity gives value for money. It can withstand hot & cool, moist & dry, rainy & arid weather. Ranger doesn’t fade and gives good durability.
| 1. | Viscosity of supply | 116 to 120 krebs unit |
| 2. | Shades available | As per shade card |
| 3. | Packs available | 20Lit, 10Lit, 4Lit and 1Lit |
| 4. | Surface to be painted | Interior & exterior walls plaster, brickwork, asbestos cement sheets, concrete etc. |
| 5. | Primer to be used | Agsar cement primer (water base) / Oil base or self primer |
| 6. | Drying time | Surface drying within 30 minutes, hard drying within 4-6 hours. The above varies with atmospheric temperature and humidity. |
| 7. | Average coverage capacity per coat | 165 to 170 square feet per litre per coat. This varies with the surface coated. |
| 8. | Finish | Silky smooth finish |
| 9. | General Directions for use | The surface to be painted should be dry and free from dirt, grease, oil and loose matter. Apply Agsar Cement Water Base/ Oil base as primer. Instead, emulsion diluted with water In the ratio 1:1 can be also applied as primer coat. If necessary smoothen the wall with Diana wall putty. Add 750ml of water to 1 litre of Ranger I-O emulsion for painting by brush/spray/roller. Second coat can be given after 4-6 hours of painting first coat. |